Haier dwe-290-tg User Manual

Page of 19
Wipe the complete unit with soft cloth
 twisted dry.
Wipe with neutral detergent if too dirty
Do not wash it directly by water
Using process
Using process
Hook
After washing,  dismount the water inlet
hose.
Do  not  store  water  in  the tub for long 
period. Discharge the water immediately
after each using.
Pull off  the power plug and hang up the
power cord.
Hang up the drain hose.
Wipe off the water drops on the surface
and  inside  the tub with clean soft cloth.
Open the cover of the wash tub and the
inner/outer  cover  of  the  spin  tub   for 
some time (about one hour), then close
them.
Disposal of the complete unit
Thinner
Alcohol
Petrol
2. Cleaning the filter frame
    Clean  the lint around the frame 
    and  flush with tap water.
3. Install the filter frame.
    (1).Insert  the mounting plate at 
         the bottom of  the frame into
         the valve cover.
    (2).Hang up the hook at the left 
         upper side.
    (3).Push  the  upper  part  in  as 
          indicated in Figure 2.
Cleaning the filter frame