Haier dwe-290-tg User Manual
Before Using
Before Using
Installation and adjustment
Install the water inlet hose; Select the water level
(about 68L)
Maximum
Max
(about 83L)
Minimum
Min
(about 49L)
Medium
Med
Insert the water inlet hose into the water-filling
entrance on the control panel directly. (pull it
out to dismantle it)
entrance on the control panel directly. (pull it
out to dismantle it)
Select water level according to the
quantity of the laundries.
quantity of the laundries.
Attention:
In water filling, do not exceed
the"Max" water level. Otherwise
the water may overflow out of the
washing machine.
In water filling, do not exceed
the"Max" water level. Otherwise
the water may overflow out of the
washing machine.
Water inlet hose
Water-filling
entrance
Water level
adjusting lever
Please install and adjust the machine according to the requirement of the manual.
It is very important to your security and correct operating the machine.
It is very important to your security and correct operating the machine.
Usage of the drain hose
The drainage shall be smooth with the drain hose.
1.The height of the drain hose shall
be less than 10cm. or the drainage
will not be smooth enough and cause
incomplete drainage.
be less than 10cm. or the drainage
will not be smooth enough and cause
incomplete drainage.
3.If the drain hose is too long, cut
it at mid point. To make smooth
drainage, cut the front end of
the hose slantingly.
it at mid point. To make smooth
drainage, cut the front end of
the hose slantingly.
2.Do not step on or press the drain hose.
4.IF extra drain hose is needed,
please make separate purchase.
The inner diameter of the extra
hose shall be not less than
30mm, and the length shall
be not exceed 1.5m.
please make separate purchase.
The inner diameter of the extra
hose shall be not less than
30mm, and the length shall
be not exceed 1.5m.