Apricorn Velocity Solo VEL-SOLO Leaflet

Visit our web site at 

www.apricorn.com

 or call 1-800-458-5448

©2011 Apricorn, Inc. Corporate Offices: 12191 Kirkham Rd., Poway, CA. 92064 (updated 5/11)

Upgrade your system to latest SATA III interface (6Gbs) and add a high speed SSD 

to boost the performance to the max.  Easy to install, the Velocity Solo is an industry 

standard PCIe 2.0 card designed to add a 2.5” Solid State Drive (SSD) via a super fast SATA 

III connection.  At 6Gbs, SATA III is twice as fast as SATA II and takes full advantage of the 

latest SSD.  The Solo also provides an additional SATA III data connection that can be used 

to connect to another SSD or HDD to provide unparalleled capacity and performance.  The 

Solo is bundled with Apricorn’s EZ Gig Cloning software with Data Select.  Data Select provides 

a simple method to deselect data folders from the cloning 

process which is helpful when migrating from a large HDD to a 

smaller SSD and perfect for creating a Boot Disk.  This gives you 

the option to run your OS and applications from a fast, smaller 

SSD boot drive, while keeping your documents and media files on 

your original hard drive.

The Velocity Solo takes just minutes to install. Simply connect your 

Solid  State  Drive  to  the  Velocity  Solo  SATA  III  connnector  and 

slide  into  an  available  PCIe  slot  in  your  desktop.  Once  installed, 

download  and  run  Apricorn’s  EZ  Gig  cloning  software  and  your 

upgrade is complete.  For additional capacity use the auxiliary SATA 

III connector for a superfast connection to an additional hard drive 

or solid state drive.

Connector

 

for 

Expansion

PCIe

 Gen 1/G

en 2 (x1

, x2, x4 o

r x8 slo

t

)

SATA
Data Cable

Disk Drive

SATA III Connector 
for expansion to 

another SATA drive

Any SATA Drive

2.5” or 3.5” / HDD or SSD

(Power cable required)

Data transfer 

speeds up to

 MB / sec