Panasonic KX-P7510 Operating Guide

Page of 216
203
Appendix
 
Two-sided printing (Duplex printing)
Two-sided printing is possible by using the MP tray, the 1st cassette or the OPT cassette (optional 
2nd feeder). However, you should not expect the same print quality and reliability that you get with 
one-sided printing. We strongly recommend that you follow the guidelines below.
The acceptable paper size is as follows:
— A4
— LETTER
— FOLIO (LEGAL 13")
— LEGAL (LEGAL 14")
Before loading paper in the MP tray, adjust it so that the edges of the media are lightly touching 
the media guides of the MP tray.
Paper weight should be 75
g
/m
to 90
g
/m
2
 (20 to 24 lbs.).
When printing, avoid printing in fill color in the area within 15 mm (0.59") from the top to prevent 
paper jam. (See below)
However, characters are printable in this area.
When single-sided printing, it’s recommended to avoid printing in fill color in this area.
 
Transparencies and labels
You may also print on transparencies and labels that are made for the printer. Panasonic has tested 
and found that the following work satisfactorily:
OHP transparency:
3M CG3300
Labels:
AVERY 5160, AVERY 5161, AVERY 5162, AVERY 5163, AVERY 5660, 
AVERY 5661, AVERY 5662, AVERY 5663, Avery L7159, Avery L7160, 
Avery L7161, Avery L7162, Avery L7163, Avery L7164 (30 labels or less per 
sheet)
Unprintable in fill color area
[a: at least 15 mm (0.59")]
Paper feed 
direction
P
opulation of World
a
a
KX-P7500 Series
a
Ex. printing in fill color