Hitachi CP-A300NM User Manual

60

OPTION menu

REMOTE FREQ.
(1)  Use the ▲/▼ button to change the projector's remote sensor 

frequency setting 

( 4, 17).

1:NORMAL Ù 2:HIGH

(2)  Use the ◄/► button to change the 

projector's remote sensor on or off.

ON Ù OFF

The factory default setting is for both 1:NORMAL and 2:HIGH to be 

on. If the remote control does not function correctly, disable either of 

them.

It's not possible to disable both options at the same time.

Selecting this item displays COMMUNICATION 

menu. 

In this menu, you can congure the serial 

communication settings of the projector using the 
CONTROL

 port.

• Select an item using the cursor buttons ▲/▼. 

Then pressing the ► button opens the submenu 

for the setting item you selected. Or, pressing 

the ◄ button instead of the ► button makes the 

menu back to the previous one without changing 

the setup. Each submenu can be operated as 

described above.

• When COMMUNICATION TYPE 

( 61) is set to 

OFF, the other items in COMMUNICATION menu 

are invalid. 

• For the function of serial communication, refer to

the User's Manual - Network Guide.

(continued on next page)