Panasonic KX-P8420 Installation Guide
6) Press
5
5 to change NO to YES and press Enter. “Ethernet IP Address” is
displayed.
7) Press Enter. The current IP address assigned to the KX-P8420 is displayed.
8) Use the
8) Use the
5
5 and 3
3 to change the IP address to the desired address. Start from the
rightmost digit and work your way left.
5 will increase the digit over the cursor, 3
will shift the cursor one digit to the left.
9) Press Enter and “Ethernet Subnet Mask” is displayed.
10) Press Enter and the current Subnet mask assigned to the KX-P8420 is displayed.
11) Use the
10) Press Enter and the current Subnet mask assigned to the KX-P8420 is displayed.
11) Use the
5
5 and 3
3 to change the Subnet mask to the desired Subnet mask. Start
from the rightmost digit and work your way left.
5 will increase the digit over the
cursor,
3 will shift the cursor one digit to the left.
12) Press Enter and “Gateway Address” is displayed.
13) Press Enter and the current Gateway address is displayed.
14) Use the
13) Press Enter and the current Gateway address is displayed.
14) Use the
5
5 and 3
3 to change the Gateway to the desired Gateway. Start from the
rightmost digit and work your way left.
5 will increase the digit over the cursor,
3
3will shift the cursor one digit to the left.
15) Press Enter and “AppleTalk Setup” is displayed.
16) Press Exit and the printer will reinitialize with the TCP\IP information entered.
17) Ensure that the network cable is inserted into the KX-P8420.
16) Press Exit and the printer will reinitialize with the TCP\IP information entered.
17) Ensure that the network cable is inserted into the KX-P8420.
Section 2
Configuring the KX-P8420 for SMB using WebTools.
1) Start Netscape or Internet Explorer.
2)
Enter the TCP\IP address of the KX-P8420 into the web browser and press Enter.
The WebTools opening window is displayed.
The WebTools opening window is displayed.