Panasonic KX-FLB881 Operating Guide

Page of 20
3. Help
16
Detailed operating instructions are on the CD-ROM, or can be viewed at www.panasonic.com/help
OUT OF PAPER INPUT TRAY 
#1”
L
Recording paper is not installed or the input tray has run out of paper. Install 
paper.
L
Recording paper is not fed into the unit properly. Reinstall paper.
L
The paper input tray is not installed or is not inserted completely. Insert the 
paper input tray into the unit.
Note:
L
#1”: Paper input tray
L
#2”: Manual input tray
PAPER JAMMED”
OPEN TOP COVER”
L
A recording paper jam occurred. Remove the jammed paper.
PC FAIL OR BUSY”
L
The cable or the computer power cord is not connected correctly. Check the 
connections.
L
The software is not running on the computer. Restart the software and try 
again.
PLEASE WAIT”
L
The unit is warming up. Wait for a while.
REDIAL TIME OUT”
L
The other party’s fax machine is busy or has run out of recording paper. Try 
again.
REMOVE DOCUMENT”
L
The document is jammed. Remove the jammed document.
L
Attempted to send or copy a document longer than 600 mm (23
5
/
8
") using 
the auto document feeder. Press {STOP} to remove the document. Divide 
the document into two or more sheets and try again.
REMOVE PAPER IN INPUT 
TRAY #2”
L
The recording paper is installed in the manual input tray when trying to copy, 
receive faxes or print reports. Remove the recording paper from the manual 
input tray.
REPLACE DRUM CHANGE 
SUPPLIES”
L
The drum unit’s service life is finished. Replace the drum unit immediately.
RX MEMORY FULL”
L
The memory is full of received documents due to a lack of recording paper 
or a recording paper jam. Install paper or remove the jammed paper.
L
If feature #442 is set to 
ALWAYS”, check the connection between the 
computer and the unit.
TONER EMPTY”
CHANGE SUPPLIES”
L
The toner’s service life is finished. Replace the toner cartridge immediately.
TONER LOW”
CHANGE SUPPLIES”
L
The toner’s service life is near its end. Replace the toner cartridge as soon 
as possible.
TOP COVER OPEN”
L
The top cover is open. Close it.
TRANSMIT ERROR”
L
A transmission error occurred. Try again.
WARMING UP”
L
The inside of the unit is cold. Let the unit warm up. Wait for a while.
WRONG PAPER”
L
The fax message was printed on paper which is shorter than letter size 
paper. Use appropriate size paper.
Display
Cause & Solution
FLB881-PFQW2652ZA-QRG-en.book  Page 16  Friday, July 20, 2007  4:11 PM