Panasonic KX-P7110 Network Guide

Click KX-P7110 and click Install Network 
Utilities.

Follow the instructions until the screen below is 
displayed.

Click on the 

 check button, and then click 

.

Click the KX-P7110 printer you want to set up in 

the list. 
To select the printer, refer to the MAC address 
confirmed at step 2. 

Click the Setup menu and select Network 

Setup…. 

Click the TCP/IP tab.

Remove the check of the Use DHCP/BOOTP 
check box, then enter IP address, Subnet Mask 

and Default Gateway. Click 

. 

Confirm the setting and click 

.

You will see the message “Update is completed. 
Do you wish to reset the printer?”.

Click .

Click 

Device menu and select Exit.

■

Confirm the printer is ready for printing.

Insert the printer CD-ROM into the CD-ROM 
drive and click KX-P7110.

Click Install Network Port.

Follow the instructions until the screen below is 
displayed.

Click on the Yes check button, and then click 

.

Click on the Print by using LPR check button 

and click 

.

Enter the IP address or host name of the 
printer.

• Clicking 

 will display the list of printers on 

the network.

Click .

Change the print port name (ex. KX-P7110 
No.1) if needed.

• By default, the IP address: lp will be automatically 

assigned to the Destination print port name.

Note:
• Destination print port name should be a unique 

name because it is used as the printer port name 
when setting the printer driver. 

Click .

Click .