Panasonic KX-FLB881 Operating Guide
9. Programmable Features
56
Setting the output tray to use
for faxing
{#}{
for faxing
{#}{
4}{4}{1}
You can select the output tray that will be used for printing received faxes.
{
{
1} “
#1”: Upper output tray (Up to approx. 100 sheets)
{
2} “
#2” (default): Lower output tray (Up to approx. 50 sheets)
Note:
L
Lists or reports printed by pressing {HELP} (page 18) or {MENU} (page 88)
will be stacked on the upper output tray.
will be stacked on the upper output tray.
Receiving a fax into the
computer
{#}{
computer
{#}{
4}{4}{2}
If you wish to receive a fax into the computer, activate this feature and run [PC
FAX] from Multi-Function Station.
{
FAX] from Multi-Function Station.
{
0} “
OFF” (default): Deactivates this feature.
{
1} “
ALWAYS”: If the unit recognizes the connection to the computer, it will
transfer a received document to the computer. If the unit cannot recognize the
connection, it will store a received document in the memory once, then transfer
the data after recognition of the connection.
{
connection, it will store a received document in the memory once, then transfer
the data after recognition of the connection.
{
2} “
CONNECTED”: If the unit recognizes the connection to the computer, it will
transfer a received document to the computer. If the unit cannot recognize the
connection, it will print out the data.
connection, it will print out the data.
Setting the computer for PC
fax reception
{#}{
fax reception
{#}{
4}{4}{3}
To select the computer that will be used for receiving a fax. See page 21 for
details.
details.
Resetting fax features to their
default settings
{#}{
default settings
{#}{
4}{5}{9}
{
0} “
NO” (default)
{
1} “
YES”
To reset the fax features:
1. {MENU} i {#}{4}{5}{9}
2. Press {1} to select “
YES”. i {SET} i {SET} i {MENU}
Note:
L
The PC fax reception (feature #443 on page 21) will not be reset.
Feature/Code
Selection