Panasonic DP-8060 Operating Guide
42
Making Copies
Zoom/Effects
The original can be copied by setting a binding
margin on the edge or in the centre of the paper.
margin on the edge or in the centre of the paper.
or
The copying image can be centred automatically on
selected paper.
selected paper.
Opening the ADF
NOTE:
● If a part of copied image is missing, change the
● If a part of copied image is missing, change the
Margin Reduction setting to Yes. Refer to "03
Margin Reduction Def." of the Copier Settings.
(See page 73)
Margin Reduction Def." of the Copier Settings.
(See page 73)
● When "OVERLAY" or "FORM OVERLAY" is
selected, the binding margin is also set for the
overlay original.
overlay original.
● If this setting is made when 2-Sided copying is
selected, the print position comes out different
between the front and back side of copy.
between the front and back side of copy.
1
2
1
2
■
■
■
■
■ Margin
■
■
■
■
■ Centring
● In Centring and Image
Repeat mode, make
copies with the ADF
open more than 45
degrees wide.
copies with the ADF
open more than 45
degrees wide.
● Remove the originals from the ADF before
selecting the Centring and Image Repeat mode.
An incorrect position detection of the original may
occur when a strong light shines onto the glass
during the Centring and Image Repeat mode.
Also an image which the copier interprets as a
black pattern in the Centring and Image Repeat
modes.
An incorrect position detection of the original may
occur when a strong light shines onto the glass
during the Centring and Image Repeat mode.
Also an image which the copier interprets as a
black pattern in the Centring and Image Repeat
modes.