Panasonic DP-C406 Operating Guide
26
Troubleshooting
Check
Check if the Power Switches (Main Power
Switch on the rear and Power Switch on the
front side of the machine) are turned ON and if
the power cord is plugged into the AC outlet.
Switch on the rear and Power Switch on the
front side of the machine) are turned ON and if
the power cord is plugged into the AC outlet.
Is the display dark?
Press the Energy Saver key on the Control
Panel.
Panel.
Does the Energy Saver key flash (or light),
and is the display turned OFF?
and is the display turned OFF?
Perform operations in accordance with each
message. Refer to the Operating Instructions
(For Maintenance) of provided CD-ROM.
message. Refer to the Operating Instructions
(For Maintenance) of provided CD-ROM.
Do any of the U## code and messages
appear on the display?
appear on the display?
(U1, U4, U6, U7, U11....etc.)
Add staples.
Remove all jammed staples.
Refer to the Operating Instructions (For
Maintenance) of provided CD-ROM.
Remove all jammed staples.
Refer to the Operating Instructions (For
Maintenance) of provided CD-ROM.
Do the Add Staples Indicator and message
appear on the display?
appear on the display?
Add papers. Refer to the Operating
Instructions (For Maintenance) of provided CD-
ROM.
Instructions (For Maintenance) of provided CD-
ROM.
Do the Add Paper Indicator and message
appear on the display? (
)
Remove the misfed paper. Refer to the
Operating Instructions (For Maintenance) of
provided CD-ROM.
Operating Instructions (For Maintenance) of
provided CD-ROM.
Do the Paper Misfeed Indicator and message
appear on the display? (J##)
appear on the display? (J##)
Turn OFF the Power Switch on the front side
and the Main Power Switch on the rear of the
machine, and then turn them back ON. If the
error code has not been cleared, call the
authorised Panasonic dealer.
and the Main Power Switch on the rear of the
machine, and then turn them back ON. If the
error code has not been cleared, call the
authorised Panasonic dealer.
Do E#-## Indicator and message appear on
the display?
the display?
Turn OFF the Power Switch on the front side
and the Main Power Switch on the rear of the
machine, and then turn them back ON. If the
machine still does not accept the next job, call
the authorised Panasonic dealer.
and the Main Power Switch on the rear of the
machine, and then turn them back ON. If the
machine still does not accept the next job, call
the authorised Panasonic dealer.
The machine does not accept the next job
during operation, instructed job would not be
accepted for a long time period, or job would
not be completed.
during operation, instructed job would not be
accepted for a long time period, or job would
not be completed.
Select “Darker”.
Is the Density level set to the “Lighter” side?
Replace the Toner Cartridge.
Refer to the Operating Instructions (For
Maintenance) of provided CD-ROM.
Maintenance) of provided CD-ROM.
Do the Add Toner Indicator and message
appear on the display? (
)
If the measures outlined above do not solve the problem, call the authorised Panasonic dealer.
Remove the paper from inner tray.
(For the capacity of Inner Tray, see page 30.)
(For the capacity of Inner Tray, see page 30.)
Does the error message “Remove paper from
inner tray” appear on the display?
inner tray” appear on the display?
Action
Light Copies
Unit Does Not Operate