Panasonic DPMC210 Operating Guide
4
– Activate the fax to email address
Useful information:
If you are out for a long period of time, we recommend the following.
1. Set this feature.
2. Also activate PC FAX, and keep your computer turned ON.
If you are out for a long period of time, we recommend the following.
1. Set this feature.
2. Also activate PC FAX, and keep your computer turned ON.
R For PC FAX, start Multi-Function station, then activate [PC FAX].
In this case, data will be transferred to your computer using PC FAX feature, then the transferred data will be deleted
from your unit automatically. The same data will also be sent to your email address, so you can check your
messages daily, preventing the unit to run out of paper/memory etc.
from your unit automatically. The same data will also be sent to your email address, so you can check your
messages daily, preventing the unit to run out of paper/memory etc.
2.2.4 Saving a fax document in a folder on an SMB folder
When you save the fax document in an SMB folder, program the SMB folder settings beforehand (page 1).
1 {Advance}
2 Press {C} or {D} repeatedly to select “Fax Preview”. A {Set}
3 Press {C} or {D} repeatedly to select the desired fax document. A {;}
4 Press {C} or {D} repeatedly to select “SMB Folder”. A {Set}
5 Press {C} or {D} repeatedly to select the desired SMB folder. A {Set}
2 Press {C} or {D} repeatedly to select “Fax Preview”. A {Set}
3 Press {C} or {D} repeatedly to select the desired fax document. A {;}
4 Press {C} or {D} repeatedly to select “SMB Folder”. A {Set}
5 Press {C} or {D} repeatedly to select the desired SMB folder. A {Set}
R The fax document will be automatically saved in the selected folder on the network.
2.2.5 Erase FAX Memory
Setting the fax to email
address
MBNM4NM5NM2N
address
MBNM4NM5NM2N
If you wish to transfer a received fax document to desired email address,
activate this feature.
M0N “Off” (default): Deactivate this feature.
M1N “On”: If you set the email destinations beforehand, the received fax
document will be automatically transferred as an email attachment to the
desired address.
activate this feature.
M0N “Off” (default): Deactivate this feature.
M1N “On”: If you set the email destinations beforehand, the received fax
document will be automatically transferred as an email attachment to the
desired address.
I cannot receive the whole
document.
document.
R The fax to email address (feature #452) is activated. In this case, only
faxes up to 5 MB can be received. Deactivate the feature, then ask the
other party to re-send the document.
other party to re-send the document.
Erasing all received fax
memory
MBNM4NM5NM8N
memory
MBNM4NM5NM8N
M0N “No” (default)
M1N “Yes”
R Disconnect the telephone line cord and USB cable before activating this
M1N “Yes”
R Disconnect the telephone line cord and USB cable before activating this
feature.
To erase all received fax:
1. MMenuN A MBNM4NM5NM8N
2. Press M1N to select “Yes”. A MSetN A MSetN
1. MMenuN A MBNM4NM5NM8N
2. Press M1N to select “Yes”. A MSetN A MSetN