Panasonic KX-P7105 Operating Guide

Unables to connect to NetWare Server in Print Server mode.
• Make sure the frame type is set correctly.
• KX-P7110 can switch to PSERVER and RPRINTER automatically, but it may take extra time

depending on the environment.

• If file server is defined to the KX-P7110, make sure the file server name is correct.
• Make sure the printer port name is correct. Make sure the same port name is assigned to the

KX-P7110 and NetWare server. If there are more than one KX-P7110 on the network, make
sure the assigned port name is unique.

• Make sure the same NetWare login password is set to the KX-P7110 and the file server.
• Make sure the machine name and print server name are the same.

Unables to Print.
• Make sure that the KX-P7110 is connected to the network correctly.

■

Unables to detect KX-P7110.
• Make sure that the KX-P7110 is connected to the network correctly.
• If the KX-P7110 is on the assigned zone, make sure the zone name is selected from

"Chooser" .

• Make sure the correct printer driver is selected.
• Make sure AppleTalk is checked as Available from the Chooser.
• Make sure AppleTalk in the control panel is the same environment as you are using.  

• When AppleTalk is selected, make sure EtherTalk is selected. 
• When Network is selected, make sure EtherTalk is selected. 
• Print out the Configuration Report and make sure the AppleTalk protocol is set to ENABLE.

The setting up can be done using Windows utility, or Macintosh utility.  

• Print out the Configuration Report and make sure the EtherTalk port name is not assigned.

Shows "Not enough Memory" and unables to print.
 
• Application memory may not be enough. Click the application icon, select Information from

file menu, and increase memory size.

• Close any other running applications.
• Increase the available space of the hard disk of your computer.