Panasonic DP-C406 Operating Guide
Chapter 2 Scan
/Email Operations
13
2Scan/Email Operations
Scan to the SD Memory Card
The scanned image will be directly transferred to the SD Memory Card.
z
Be sure to use only a genuine SD Memory Card* (up to 32 GB). (Any commercial grade genuine SD / SDHC
Memory Card can be used.)
Memory Card can be used.)
z
The scanned image(s) cannot be saved to the SD Memory Card if the setting of Function Parameter “70 SD/
USB Memory Function” (General Settings > Key Operator Mode) is set to “No”.
For more details on this setting, refer to General Settings in the Operating Instructions (For Function
Parameters) of provided CD-ROM.
USB Memory Function” (General Settings > Key Operator Mode) is set to “No”.
For more details on this setting, refer to General Settings in the Operating Instructions (For Function
Parameters) of provided CD-ROM.
* SD Memory Card and SDHC Memory Card are referred to as SD Memory Card in this manual.
z
SD Logo is a trademark.
z
SDHC Logo is a trademark.
1
Place original(s).
z
For details on how to place originals, refer to
Placing Originals (see page 6) and Basic
Operation Procedure (see page 9).
Placing Originals (see page 6) and Basic
Operation Procedure (see page 9).
2
Press the Scan/Email key.
3
Select “Basic Menu” to configure the
required settings, and then select
“OK”.
required settings, and then select
“OK”.
z