Panasonic DP-C406 Operating Guide
Chapter 2 Scan
/Email Operations
20
4
Select “Address Book”.
5
Select “SD Card / Hard Drive”.
6
Select an Image Box in the Hard
Drive.
Drive.
z
Only one Image Box can be selected at a
time.
time.
z
When the Hard Disk Drive is selected as the
storage destination, the scanned image
cannot be saved to the SD Memory Card
and USB Flash Memory at the same time.
storage destination, the scanned image
cannot be saved to the SD Memory Card
and USB Flash Memory at the same time.
z
If the setting of Function Parameter “02
Scan to HD Function” (Scanner Settings >
Key Operator Mode) is set to “No”, the
Confirmation screen displays the “Function
not available” error message and beeps.
Scan to HD Function” (Scanner Settings >
Key Operator Mode) is set to “No”, the
Confirmation screen displays the “Function
not available” error message and beeps.
z
If you do not touch any key for 3 seconds, or
select “Close” on the Touch Panel Display,
the machine will display the previous
screen.
For more details, refer to General Settings
in the Operating Instructions (For Function
Parameters) of provided CD-ROM.
select “Close” on the Touch Panel Display,
the machine will display the previous
screen.
For more details, refer to General Settings
in the Operating Instructions (For Function
Parameters) of provided CD-ROM.
7
Press the Start key.
When the document scanning completes, the
scanned data is saved on the Hard Disk Drive.
scanned data is saved on the Hard Disk Drive.
z
When scanned image transfer fails, a
transfer error message is displayed.
transfer error message is displayed.
z
For instructions on how to download the
saved data, refer to Retrieving Scanned
Image from Hard Disk Drive (see page
21).
saved data, refer to Retrieving Scanned
Image from Hard Disk Drive (see page
21).