Panasonic DPMC210 Operating Guide
9. Programmable Features
62
Setting the paper input tray to
use for lists and reports
printing
{#}{
use for lists and reports
printing
{#}{
3}{9}{0}
This feature will be displayed only when the lower input tray is installed (page
85).
{
85).
{
1} “
#1” (default): Standard input tray
{
2} “
#2”: Lower input tray
{
3} “
#1+#2”
Note:
L
To select “
#2”, select “Plain Paper” or “Thin Paper” for the recording
paper type setting (feature #383 on page 61).
L
To select “
#1+#2”,
–
select the same paper size for the standard input tray (feature #380 on
page 61) and lower input tray (feature #382 on page 61). If either is
changed, “
page 61) and lower input tray (feature #382 on page 61). If either is
changed, “
#1” will be selected automatically.
–
select “
Plain Paper” or “Thin Paper” for the recording paper type
setting (feature #383 on page 61).
Setting the waiting time for
the power save mode
{#}{
the power save mode
{#}{
4}{0}{3}
To set the length of time before the unit enters power save mode.
{
{
1} “
5min”: 5 minutes
{
2} “
15min” (default): 15 minutes
{
3} “
30min”: 30 minutes
{
4} “
1h”: 1 hour
Note:
L
When in power save mode, the unit needs to preheat the fuser unit before
it can begin printing.
it can begin printing.
Holding the previous contrast
setting
{#}{
setting
{#}{
4}{6}{2}
{
0} “
Disabled” (default): Deactivates this feature.
{
1} “
Enabled”: The unit will hold the previous setting.
Note:
L
The previous setting will be held individually for copying and sending faxes.
Setting the default operation
mode
{#}{
mode
{#}{
4}{6}{3}
To select the default operation mode when the selected time of the mode timer
(feature #464) passes.
{
(feature #464) passes.
{
1} “
Copy” (default): Copy mode is selected as default.
{
2} “
Fax”: Fax mode is selected as default.
Note:
L
You cannot select the scan mode or print mode using this feature.
Setting the default operation
mode timer
{#}{
mode timer
{#}{
4}{6}{4}
To set the timer before returning to the default operation mode (feature #463).
{
{
0} “
Off”: Deactivates this feature.
{
1} “
30s”: 30 seconds
{
2} “
1min” (default): 1 minute
{
3} “
2min”: 2 minutes
{
4} “
5min”: 5 minutes
Cleaning the drum
{#}{
{#}{
4}{8}{0}
Clean the drum cartridge automatically. See page 111 for details.
Setting toner save feature
{#}{
{#}{
4}{8}{2}
{
0} “
Off” (default): Deactivates this feature.
{
1} “
On”: The toner cartridge will last longer.
Note:
L
This feature may lower the print quality by reducing toner consumption.
Changing the color
calibration for all colors
(cyan, magenta, yellow and
black)
{#}{
calibration for all colors
(cyan, magenta, yellow and
black)
{#}{
4}{8}{5}
Change the color calibration if color printing is too dark or too light. See page 81
for details.
for details.
Feature/Code
Selection