Panasonic DP-2310 Operating Guide
![Panasonic](https://files.manualsbrain.com/attachments/8f677e63fb64cbb6c62d09e6242996e7631380a8/common/fit/150/50/34d700d3fb727c767799b2da5cc474b219c0a4312e9e3044c99491a2fb9a/brand_logo.png)
152
Problem Solving
Troubleshooting
If You Have Any of These Problems
Mode
Symptom
Possible Cause / Action
Page
During Transmission Document doesn't
feed/multiple feed
1. Check that your document is free of staples and paper
clips, and that it is not greasy or torn.
2. Check that your document is the right type to send through
an ADF by consulting. If your document has the
characteristics listed, use the Platen instead.
characteristics listed, use the Platen instead.
3. Check that the document is loaded properly.
Does not stamp
Check Fax parameter No. 004 and No. 028 settings.
Stamp too light
Replace stamp or refill ink.
Transmission Copy
Quality
Quality
Vertical lines on the
transmitted document
transmitted document
Check own copy quality. If copy is OK, your machine has no
problem, report to the receiving party that they have a problem.
If copy is NG, clean the Document Scanning Area.
problem, report to the receiving party that they have a problem.
If copy is NG, clean the Document Scanning Area.
---
Transmitted document
is blank
is blank
During Reception
: Add Paper
Replenish the recording paper.
---
Recording paper
misfeed
misfeed
Remove the misfeed paper.
(See Operating Instructions (for Copier))
(See Operating Instructions (for Copier))
---
Recording paper
doesn't advance into
machine
doesn't advance into
machine
Make sure that there is paper in the Paper Cassette. Follow the
instructions for loading paper.
instructions for loading paper.
---
Recording paper
doesn't eject after
printing
doesn't eject after
printing
Check to see if the recording paper is jammed inside of the
machine.
machine.
---
Document auto
reduction doesn't work
reduction doesn't work
Check Print Reduction settings.
: Add Toner
Replace the Toner Bottle.
---
: No Waste Toner
Box
Install the Waste Toner Box.
---