Panasonic DP-8060 Operating Guide

11

■ The machine should be installed in a well-ventilated

area to minimize the ozone density in the air.

■ Do not turn the Power Switch Off, or open the Front

Cover during copying/printing.

■ Sleep/Shutdown Mode Notice

●

The following functions will not work if the Sleep/
Off Mode setting is set to the Shutdown mode.
When using any of the following functions, we
recommend that you leave the Sleep/Off
Mode in the initial factory default setting (Sleep
mode).
 - Printer Function (Local Parallel Port and Network

Connections)

 - Internet Fax/Email Function
 - Facsimile Function (Option)

■ Key Operator Password

●

The Initial Machine Modes can be checked or
changed with the Function Modes, however, these
modes require the Key Operator Password.

■ User Authentication

The User Authentication works for this machine
under the management of the Windows Server. As a
result, users must be authenticated before they can
use the functions of the machine (copying, faxing,
scanning, and printing). The supported authentication
protocol is NTLM v2.
Users
 - Users login to this machine using their Windows

account (user name and password).

System Administrator
 - The system administrator can manage user

account by using Windows Server.

 - User authentication can be set independently for

each function (copying, faxing, scanning, and
printing).

■ Dept. (Departmental) Code

When the Department Counter function is set up, the
Dept. (Department) Code input screen is displayed
on the Touch Panel Display. A registered Department
Code (1 to 8-digit) is required to gain access to each
secured function, or the secured Copy/Fax/Scanner
function(s) cannot be used. Please consult with the
Key Operator regarding the Department Code(s) for
the desired function.

Procedures :
      Input a registered department code (1 to 8-digit).
      Press the SET or START key.

■ Maximum Copies Limitation

After setting the maximum allowed number of copies
for each department, consult with your Key Operator
when the total copy count reaches the designated
limit and the “DEPT.MAXIMUM COPIES HAS BEEN
REACHED” message appears on the Touch Panel
Display.

■ Power Switch

If you are not going to
use the copier for long
periods of time, turn
OFF the Power Switch
on the Left Side of the
machine and wait 10
seconds then, turn OFF
the Main Power Switch
on the Rear Side of the
machine.

■ Auto Reset Time

As the initial setting for Auto Reset Time is 1 minute,
the selected operation mode goes back to default
operation mode after 1 minute. If you wish to change
the Auto Reset Time, consult with your Key Operator.

2

1