Panasonic UF-8100 Instruction Manual

131

456

• Machine received a confidential document or was 

requested to be polled of a confidential document 
under any of following conditions.

1.  Not enough space in memory to receive the 

confidential document.

2.  Confidential Mailbox is full.
3.  While printing, the machine received a document.
• Machine was requested to relay a document.

1.  Print a File List and check the contents.
2.  Wait until machine finishes printing.

492/493/ 

494

Communication error occurred while receiving.

Check with the other party.

--

495

Telephone line disconnected.

Check with the other party.

--

501/502/

503/504

Communication error occurred using the internal V.34 
Modem.

Check with the other party.

--

540/541/ 

542/

543/544

Communication error occurred while transmitting.

1.  Reload the document and send again.
2.  Check with the other party.

--

550

Telephone line disconnected.

Check with the other party.

--

552/553/

554/555

Communication error occurred while receiving.

Check with the other party.

--

580

Sub-address transmission to a machine that has no 
Sub-address function.

Check the remote station.

581

Sub-address Password transmission to a machine 
that has no Password Sub-address function.

Check the remote station.

623

No document loaded on the ADF.

Reload the document and send again.

--

630

Redial was not successful due to a busy line.

Reload the document and send again.

--

631

During dialling, STOP was pressed.

Reload the document and send again.

--

634

Redial was not successful due to no response from 
the called station or wrong number dialled.

Note: If busy tone was not detected, the machine will 

only redial once.

Check the telephone number and send again.

--

638

Power failure occurred during the communication.

Check the power cord and plug.

--

718

Page Memory Overflow occurred while receiving 
printing data. The paper size selected within your 
application to print is larger than the paper size loaded 
in the Paper Tray(s).

Check the document size and resolution.

 

Ask sender to resend in a supported size and 
resolution.

--

730

Cannot retrieve the Journal nor program the Internet 
Parameters and the Auto dialler remotely via email 
from a PC.

Check that the Fax Parameter No. 158 (PC 
Remote Update) is set to “Valid”.

731

The dialler buffer for manual dialling was full (50 
stations) when the Relay Transmission Request was 
received.

Request the sender to resend the Relay 
Transmission Request after the reserved 
communication is finished.

--