Panasonic UF-8100 Instruction Manual
23
G
e
tting T
o
K
n
ow
Y
our Ma
chine
NOTE
1. If your machine sounds an alarm (pi-pi-pi) in Step 3 above, this indicates that the dialler is Full
(More than 50 transmission jobs reservations have been already reserved).
2. Auto dialler (Address Book/One-Touch/ABBR.) is only available when stations are registered.
3. When transmitting at S-Fine or 600 dpi, there is a possibility that printing quality may
deteriorate at the remote station due to its reception capability. If this occurs, re-send with
Direct Transmission or use "Fine" Resolution.
Direct Transmission or use "Fine" Resolution.
4. You can search for another name starting with the same character by scrolling with the Cursor
Keys (
/
).
Lighter Normal Darker
STANDARD for standard originals
FINE
FINE
for detailed originals
S-FINE
for finer detailed originals
600 dpi
for 600 dpi detailed originals
HALFTONE (FINE)
for photo originals with Fine
Resolution
Resolution
HALFTONE (S-FINE)
for photo originals with S-Fine
Resolution
Resolution
HALFTONE (600 dpi)
for photo originals with 600 dpi
Resolution
Resolution
Select the desired Transmission
setting.
(See the column on the right)
setting.
(See the column on the right)
The document(s) is stored into
memory with a file number. Then starts
sending the document(s).
memory with a file number. Then starts
sending the document(s).
Transmission Settings
START
RESOLUTION
CONTRAST
- [ ] +
(See Note 3)
3a
3b
3c
3d
2
dialling No. Indication Sample
When Fax Parameter No. 119 is set to "1:One-
Touch". (See page 110.)
Touch". (See page 110.)
<ABBR No.>
<One-Touch>
When Fax Parameter No. 119 is set to
"2:Quick Name Search". (See page 110.)
"2:Quick Name Search". (See page 110.)
:Upper Side
:Lower Side
:Lower Side
[001]SALES
5551234
<01 >SALES
5551234
SALES
5551234
Quick Name Search
dialling
dialling
One-Touch/ABBR. dialling)
Manual Number dialling
Directory Search dialling
and/or
or
4
You can send the same
document(s) to multiple stations.
Multiple stations can be selected by
the Step 3a (3b), 3c and/or 3d, and
then pressing
document(s) to multiple stations.
Multiple stations can be selected by
the Step 3a (3b), 3c and/or 3d, and
then pressing
.
START
and/or
(
Adjusting the Contrast of
scanned image data by
pressing cursor keys (
scanned image data by
pressing cursor keys (
/
).
Verification Stamp
ON : The light is lit.
OFF : The light is off.
CONTRAST
STAMP