Panasonic UF-8100 Instruction Manual

Getting To Know Your Machine

Operation Chart

Problem Solving

User Error Codes (U Code)

Jam Error Codes (J Code)

NOTE

1. The J## Code indicates the most probable Jam location. If the jam message reappear after

the jam is cleared, paper is most likely jammed at other location(s). Check the Jam Error
Codes Table above for other check points and remove all misfed paper.

2. Make sure that the Jam Error Code disappears after removing the misfed paper.

3. The Jam Error Code will not disappear if the paper is still jammed in the machine. Check again

and remove all misfed paper.

Code

Check Points

Code

Check Points

U01

Front Cover is open.

U20

ADF Cover is open.

U13

Low Toner or Out of Toner. (See page 28)

U90

Battery requires replacement. (See page 133)

U16

Toner Cartridge is not installed correctly.

Code

Check Points

Code

Check Points

J00

Remove paper from the Sheet Bypass.

Open and close the Front Cover.

J71,
J72,
J74,

Remove misfed paper(s) in the ADF.
(See page 30)

J01,

J02

Pull out the paper tray(s) and remove the
jammed paper from the tray(s).
Check to make sure the Paper Guides are
properly adjusted in the tray(s). (See page 30)

J75,
J92,

J93

J43,
J44,
J80,
J82,

J83

Remove misfed paper(s) inside the machine.
(See page 30)

U20

U90

U01

U13
U16