Panasonic DP-C354 Operating Guide
78
TroubleshootingTroubleshooting
Documents Not Printing Correctly
(For DP-8060/8045/8035, DP-8020P/8020E/8016P)
Problem
Possible Cause / Solution(s)
Characters are not printed in the
correct positions or the
characters near the edges of the
page are missing.
correct positions or the
characters near the edges of the
page are missing.
Check and specify the paper size and orientation settings in
the printer driver to coincide with the application.
The characters are set outside the printing area of the machine.
the printer driver to coincide with the application.
The characters are set outside the printing area of the machine.
Incorrect font type.
Printing stops in the middle of the run.
Although print data is transferred to
your machine, it does not print.
Although print data is transferred to
your machine, it does not print.
Check whether the selected font is installed on the PC.
Select "
Select "
Use Printer TrueType fonts" on the Font tab of the
Printer Driver Properties dialog box.
Check whether there is a Network problem.
Make sure the printer is online.
Make sure the machine is not in the
Make sure the printer is online.
Make sure the machine is not in the
Shutdown Mode. Press
ENERGY SAVER key to return to standby mode. See the
Operating Instructions for Copy and Function Parameters for
details.
Operating Instructions for Copy and Function Parameters for
details.
Incorrect Output Image.
Set
Raster for the Graphics Mode in the Quality Tab.
(For PCL 6 Emulation Printer Driver.)
Make sure that “
Make sure that “
Metafile Spooling” is set to off.
(For Windows NT4.0, and Windows 98/Me.)
Make sure the Printer cable is connected properly.
Restore the power if the On line LED is Off even if the USB
printer cable is connected.
Restore the power if the On line LED is Off even if the USB
printer cable is connected.
Printing operation takes excessive
time.
time.
The wait time for printing operations depends on the spool
settings.
settings.
Reference :
Windows 98/Windows Me [Details Tab]
Windows NT 4.0 [Scheduling Tab]
Windows 2000/Windows XP/Windows Server 2003
[Advanced Tab]
Windows 98/Windows Me [Details Tab]
Windows NT 4.0 [Scheduling Tab]
Windows 2000/Windows XP/Windows Server 2003
[Advanced Tab]
Paper is exited from the unexpected
paper tray.
paper tray.
If the paper runs out from the paper tray specified by a user, the
machine automatically switches to the paper tray which contains
the same paper size by default.
To disable the automatic paper tray select function:
machine automatically switches to the paper tray which contains
the same paper size by default.
To disable the automatic paper tray select function:
In the Function Mode of the Main Unit, set [
Printer Settings]
→ [
No.04 Auto Tray Selection] to OFF. (For Standard Printer
Driver.)
Set
Set
Change Paper Tray in the Device Tab to Specified Tray