Panasonic DP-8060 Operating Guide

54

■ User Parameters (Internet Parameters)

01

Logo

Up to 25 characters & digits.

02

Character ID

Up to 16 characters & digits.

03

ID No.

Your Fax Telephone Number. (Up to 20 digits)

04

Time Zone

The Time Zone is required as part of the Email header information when sending
Internet faxes.

05

EMAIL Address

The Email Address assigned to your machine for sending and receiving. (Up to
60 characters)

06

SMTP Server Name

The name of the SMTP Mail Server with Port Number. (Up to 60 characters)

(See Note)

07

SMTP Server IP

IP Address of the SMTP Mail Server with Port Number.

08

SMTP AUTH Name

The SMTP Auth Name. (When you set this Parameter, change the setting of Fax

(See Note)

Parameter No. 170 (SMTP Authentication) to "Valid" in advance.
(Up to 40 characters) (See page 173)

09

SMTP AUTH Password

The SMTP Auth Password. (When you set this Parameter, change the setting of
Fax Parameter No. 170 (SMTP Authentication) to "Valid" in advance.
(Up to 10 characters) (See page 173)

10

POP Server Name

The name of the POP Mail Server with Port Number. (Up to 60 characters)

(See Note)

11

POP Server IP

IP Address of the POP Mail Server with Port Number.

12

POP User Name

User Name assigned to your machine. (Up to 40 characters)

13

POP Password

Password assigned to your machine. (Up to 10 characters)

15

LDAP Server Name

The name of the LDAP Server with Port Number. (Up to 60 characters)

(See Note)

(Available for some countries only.)

16

LDAP Server IP

IP Address of the LDAP Server with Port Number.
(Available for some countries only.)

17

LDAP User Name

Login Name assigned to your machine. (Up to 40 characters)
(Available for some countries only.)

18

LDAP Password

Password assigned to your machine. (Up to 10 characters)
(Available for some countries only.)

19

LDAP Search Base

ID for starting the search in the directory on the LDAP server.
(Up to 60 characters) (Available for some countries only.)

NOTE

1. These setting is required only when “26 DNS Server Address” in General Settings is set to “Yes”.

When the setting is “No”, set each IP Address, refer to For Key Operator in the included Operating
Instructions (For Copy & Function Parameters).

Depending on how your machine will be configured to communicate on the LAN, the appropriate parameters listed in the table
below must be set up first. (See page 46)