Panasonic DP-C354 Operating Guide
13
Chapter 2 Scan/Email Operations
6
Insert a PCMCIA/PC Card Adapter
with a memory card.
Push on the slot cover to open it.
Insert a PCMCIA/PC card into the PCMCIA/
PC Card slot as illustrated. (Label side up)
7
Select “PC Card”.
z
Only one storage device can be selected at
a time. When the “PC Card” is selected as a
storage device, the scanned image cannot
be saved to the SD Memory Card, or Hard
Disk Drive at the same time.
z
If the setting of Function Parameter “84 SD/
PC Card Function” (General Settings > Key
Operator) is set to “No”, the Confirmation
screen displays an “Function not available”
error message and beeps.
If you do not touch any key for 3 seconds, or
select “Close” on the touch panel display, the
machine will display the previous screen.
For more details, refer to General Settings
in the Operating Instructions (For Function
Parameters) on the provided CD-ROM.
8
Press the Start key.
The scanned image is saved into the
PCMCIA/PC Card.
The scanned data is saved on the following
The scanned data is saved on the following
directory of the memory card.
z
Directory:
\PRIVATE\MEIGROUP\PCC\DI\IMAGE
z
The data saved on the memory card in the PC
Card Adapter can be printed by this machine
or another DP-C354, DP-C264, DP-C323, DP-
C263 or DP-C213. For more details, refer to
Printing from SD Memory Card/PC in the
Operating Instructions (for Basic Operations).
When printing PDF data, or high-compression
PDF data, install and set up the Memory Card
Print Utility. For details, refer to the Help of the
Memory Card Print Utility on the Document
Management System CD-ROM.
9
Push the Eject button on the right side
of PCMCIA/PC Card slot, and then
of PCMCIA/PC Card slot, and then
remove the PCMCIA/PC Card Adapter.
z
Do not remove the PCMCIA/PC Card while
the Access Indicator is flashing.
10
Close the Slot Cover.
z
When cancelling the operation, press the Stop key
on the Control Panel, and then select “Yes” on the
Touch Panel Display.
Eject button