Lantronix UDS2100 Specification Guide

Page of 2
15353 Barranca Parkway   
|
Irvine   
|
CA 92618   
|
USA
|
Tel: 800.422.7055   
|
Fax: 949.450.7232   
|
www.lantronix.com
©2006, Lantronix, Inc. Lantronix and TruPort are registered trademarks, and DeviceInstaller and ComPort Redirector are trademarks of Lantronix, Inc. All other trademarks are the property of their
respective owners. Specifications subject to change without notice. All rights reserved.   910-506   11/06   DGS2500
Device Serv
er      UDS2100
Features and Specifications
Serial Interface
Interface: Software-selectable RS232, RS422 or 
RS485 (2 and 4 wire support)
Connectors: 2 DB9M DTE serial ports
Data Rates: Software-selectable baud rate from 
300 to 921 KBaud
Characters: 7 or 8 data bits
Parity: odd, even, none
Stop Bits: 1 or 2
Control Signals: CTS/RTS 
(Hardware)
Flow Control: XON/XOFF (Software)
Network Interface
Interface: 10Base-T/100Base-TX Ethernet port
Software selectable Ethernet speed 10/100/Auto
Software selectable Half/Full/Auto duplex
Connector: RJ45
Standards: ARP, UDP,TCP, ICMP,Telnet,TFTP, AutoIP, DHCP, HTTP,
SNMP TCP, UDP, and Telnet,TFTP, RFC2217
LED Indicators
Power (blue)
RXI Serial (Activity) (green)
TXI Serial (Activity) (yellow)
RX2 Serial (Activity) (green)
TX2 Serial (Activity) (yellow)
RJ45 LEDs Link (100=green,10=yellow)
Act (Full=green, Half duplex=green)
Processor
CPU: Lantronix DSTNI-EX 48 MHz clock
Memory: 256 KB zero wait state SRAM, 2 MB Flash
Management
Lantronix DeviceInstaller GUI, Serial login, SNMP,
Telnet login, HTTP
Power
9-30 VDC on barrel connector (1.8 Watts 
maximum consumption)
Environmental
Operating: 0° to 60° C (32° to 140°F)
Storage: -40° to 85° C (-40 to 185°F)
Packaging 
Material: Metal enclosure with integrated wall mounts;
optional 35 mm DIN-rail mount available
Dimensions (LxWxH): 9.5 x 7.2 x 2.3 cm (3.7 x 2.8 x 0.9 in)
Weight: 0.4 kg (0.9 lb)
IP Rating: 30
Agency Approvals
FCC, C/UL, CSA, VCCI, CE, TUV, CTick
Warranty
2-year limited warranty
Shipping Dimensions
Dimensions (LxWxH): 35.5 x 17.1 x 7.6 cm (14 x 6.75 x 3 in)
Weight: 1.5 kg (3.0 lbs)
Included Software
Windows 98/ME/NT/2000/XP-based DeviceInstaller
configuration software, Com Port Redirectorsoftware 
and related utilities
Ordering Information 
Part Number
Description
UD2100001-01
UDS2100 two-port 10/100 device server; RoHs compliant 
with US domestic power supply
UD2100002-01
UDS2100 two-port 10/100 device server RoHS compliant;
international power supply with regional adapters
UD2100NL2-01
UDS2100 two-port 10/100, non-labeled device server; 
RoHS compliant; international power supply with 
regional adapters
Accessories
500-164-R 
DB9F to DB9F Null modem cable
500-163-R 
DB25M to DB9F serial cable
ACDIN2001-01
Optional DIN-rail mount
Emissions
FCC Part 15 Subpart B Class A
Radiated Emissions 30MHz – 1000MHz
ICES-003 Issue 4 February 2004 Class A
Radiated Emissions 30MHz – 1000MHz
AS/NZS CISPR 22: 2006 Class A
Radiated Emissions 30MHz – 1000MHz
EN55022: 1998 + A1: 2000 + A2: 2003 Class A
Radiated Emissions 30MHz – 1000MHz
VCCI V-3/2006.4 Class A
Radiated Emissions 30MHz – 1000MHz
EN61000-3-2: 2000 Class A
Harmonic Current Emissions
EN61000-3-3: 1995 + A1: 2001
Fluctuations and Flicker
Immunity
EN55024: 1998 
+A1: 2001 +A2: 2003
IEC_61000-4-2: 1995
ESD 8KV Air Discharge (Direct), 4KV Contact Discharge (Direct/Indirect)
IEC_61000-4-3: 1995
Radiated Immunity 3.0V/m, 1KHz AM Sine Wave at 80%
IEC_61000-4-4: 1995
EFT/Burst 1.0KV Power Lines, 0.5KV I/O Lines
IEC_61000-4-5: 1995
Surge Immunity 1.0KV Common Mode, 1.0 KV Differential Mode
IEC_61000-4-6: 1996
Conducted Immunity 3.0 Vrms, 80% AM Modulated (1KHz)
IEC_61000-4-8: 1993
Magnetic Field Immunity 50Hz 1.0 Arms/m
IEC_61000-4-11: 1994
Voltage Dips and Interrupts (>95%,0.5 periods), (30%,25 periods)(>95%,250 periods)
Isolation
Designed with protection against transients and ESD for use under harsh environments.
Serial Port: 15 KV ESD protection on RS232 and RS422/485 transceivers
Power Input: Up to non-repeated 600 W 10/100 usec pulse protection against transient over voltages
Ethernet Port: 1500 VAC isolation shielded with shield connected to chassis ground for signal integrity and ESD protection
UDS2100 Example Configurations
Ethernet
SERIAL TUNNELING CONFIGURATION