TP-LINK HS100 Smart Plug Owner's Manual

Smart Wi-Fi Plug

Troubleshooting

Smart Wi Fi Plug

Press and hold (for 5 seconds) until the Wi-Fi
LED blinks amber and green alternately to
initiate the App-Config process.

Press and hold (for 10 seconds) until the Wi-Fi
LED blinks amber rapidly to factory reset the
Smart Plug.

Blinking Amber and Green:

App-Config mode

initiated.

Quick Blinking Green:

Connecting to the

network.

Solid Green:

Connected to the network.

Quick Blinking Amber:

Factory reset.

Solid Amber:

Rebooting.

Solid Red:

No network connection.

Solid Green:

The Smart Plug is switched on.

Off:

The Smart Plug is switched off.

1. What devices can I control with the Smart Plug?

You can control lights, fans, humidifiers, portable heaters, and
any small appliances in accordance with the Smart Plug’s
specifications.

2. What should I do when I can’t turn devices on or off?

• Make sure the devices connected to the Smart Plug are

turned on.

• Make sure your mobile device and the Smart Plug are

connected to the same network.

3. What should I do when the Wi-Fi LED is lit solid red?

A solid red indicates no network connection, or that the
App-Config process has failed. You can:

• Check your network connectivity.
• Check for Wi-Fi interference or relocate the Smart Plug to

another location within the signal range.

• Repeat the App-Config process.
• Factory reset the Smart Plug and try to add it again.

4. How do I pair the Smart Plugs with Amazon Echo?

Visit