Elac FS 248 31474 Leaflet
Product codes
31474
A dream: FS 248
ELAC has many beautiful daughters. However, the FS 248 had scarcely left the
development phase before it acquired a special position. The eye of the beholder is
immediately captivated. It is in musical terms in particular, however, that it really shows
its mettle. It plays with a freedom and naturalness that is a joy to listen to. The music is
set completely free from the loudspeaker. The singers seem move to and fro on the
virtual opera stage in stately grandeur. It turns music into pure relaxation and delight.
Technical features:
development phase before it acquired a special position. The eye of the beholder is
immediately captivated. It is in musical terms in particular, however, that it really shows
its mettle. It plays with a freedom and naturalness that is a joy to listen to. The music is
set completely free from the loudspeaker. The singers seem move to and fro on the
virtual opera stage in stately grandeur. It turns music into pure relaxation and delight.
Technical features:
•
3 woofers in proven aluminium sandwich technology, with crystal membrane. With
the broadband frequency characteristic, reproduction especially in the vocal range
offers significantly more harmony.
the broadband frequency characteristic, reproduction especially in the vocal range
offers significantly more harmony.
•
In the treble, ELAC relies on its world-renowned JET tweeters. Its internal design
has been further refined, resulting in a linear frequency output and improved
harmonic distortion.
has been further refined, resulting in a linear frequency output and improved
harmonic distortion.
•
The “JET-DC” is an acoustic tuning element made from open-pored foam for
adaptation to particular spatial conditions.
adaptation to particular spatial conditions.
•
Among the features that set the FS 248 apart is a newly-developed 140 mm
midrange speaker, which is equipped with dual-wave (full-roll) fabric surround.
The special surround form enables the transverse harmonics that run through the
materials to bleed out in a gentle and attenuated way, and thus to create a very
pure acoustic image, specifically in the sensitive midrange area.
midrange speaker, which is equipped with dual-wave (full-roll) fabric surround.
The special surround form enables the transverse harmonics that run through the
materials to bleed out in a gentle and attenuated way, and thus to create a very
pure acoustic image, specifically in the sensitive midrange area.
•
The transition between midrange speaker and tweeter that is so important for the
reproduction of voices has been harmonized, creating a natural midrange
reproduction and an optimized acoustic power frequency characteristic.
reproduction of voices has been harmonized, creating a natural midrange
reproduction and an optimized acoustic power frequency characteristic.
•
Double rounded ports for bass reflex tubes. This minimizes annoying airflow
noises.
noises.
•
FS 249 is equipped with 2 bass reflex tubes. One radiates sound toward the back,
one downward onto the base plate. This arrangement allows for deeper bass
tuning and can also be used as an acoustic low-pass filter. The rear projection
bass reflex tube comes closed off with a bass control plug . By removing it, the
bass reproduction can be intensified.
one downward onto the base plate. This arrangement allows for deeper bass
tuning and can also be used as an acoustic low-pass filter. The rear projection
bass reflex tube comes closed off with a bass control plug . By removing it, the
bass reproduction can be intensified.
•
The cabinet of the FS 248 is internally reinforced to minimize cabinet resonance.
•
High-quality ELAC bi-wiring terminal with separate connections for bass, mid-
range-treble circuits. The angled cable clamps are easily accessible and are
suitable for larger cable cross sections (16 mm
range-treble circuits. The angled cable clamps are easily accessible and are
suitable for larger cable cross sections (16 mm
2
) and high quality spade terminals
(e.g. WBT products).
•
The FS 248 comes as standard with base plate and easily adjustable ELAC
spikes/rubber feet. For acoustic reasons, the base plate must always be
installed, as one of the bass reflex tubes emits downward.
installed, as one of the bass reflex tubes emits downward.
Finishes: Mocha, cherry veneer, black high gloss, titan shadow; custom finishes at additional charge
Specifications ELAC FS 248
Specifications ELAC FS 248
Dimensions
Height (without/with base
plates/spikes)
Width (without/with base plates)
Depth (without/with frame/base plates)
plates/spikes)
Width (without/with base plates)
Depth (without/with frame/base plates)
1100/1158/1173
170/230
308/323/368 mm
Crossover frequency
180/450/2900 Hz
Weight
24 kg
Nominal power handling 150 W
Type
31/2-way, bass reflex
Peak power handling
220 W
Woofer
3 x 150 mm AS-XR cone Frequency range
30 - 50000 Hz
Midrange
140 mm AS-XR cone
Sensitivity
89.5 dB/2.8V/m
Tweeter
JET III
Nominal impedance
4 Ohm
Rec. Amplifier output at nominal
impedance
impedance
30 – 300 W / channel
Minimum impedance
3.5 ohm at 110 Hz