Audiovox Voxx MTG13UHD Owner's Manual

11

The trim ring is attached to the video monitor using the perimeter screw bosses.  It is 
important that the screws used in this installation are not over tightened, and that the 
video monitor and trim ring are mounted in such a way that the assembly does not distort 
(or bend) when the mounting screws are tightened. 

There are two Trim Ring options for mounting the Unit, one is to use the supplied Trim Ring 
for all vehicles with flat headliner mounting areas (no contour) or  a thick Trim Ring (not 
supplied) that can be cut to fit the contour of a headliner that is not flat (see Appendix B 
of this manual).

1. 

Turn the DVD Player over on a surface with protective covering to prevent scratches.

2. 

Place the trim ring onto the DVD Player.  Align the pins on the trim ring with the holes 
in the metal chassis plate.

 

 

 

 

 

 

 

 

3. 

Locate the eight (8) M3 x 5mm screws in the hardware kit.

4. 

Using a screwdriver, install the eight (8) M3 x 5mm screws into the locations marked “A” 
shown in the figure below.

          NOTE: Use caution tightening screws as the threads may strip in the  overhead assembly.

Trim Ring

DVD 
Player

Trim Ring 
on DVD 
Player

（A）

（A）

（A）

（A）

（A）

（A）

（A）

（A）