TP-LINK Archer C1200 Owner's Manual
96
FAQ
Q1. What should I do if I forget my wireless password?
The default wireless password is printed on the label of the router. If the password has
been altered:
1. Connect your computer to the router using an Ethernet cable.
2. Visit
been altered:
1. Connect your computer to the router using an Ethernet cable.
2. Visit
http://tplinkwifi.net
, and log in with your TP-Link ID or the password you set for
the router.
3. Go to
Basic
>
Wireless
to retrieve or reset your wireless password.
Q2. What should I do if I forget my web management password?
• If you are using a TP-Link ID to log in, or you have enabled the Password Recovery
feature of the router, click
Forgot password
on the login page and then follow the
instructions to reset it.
• Alternatively, press and hold the Reset button of the router until the Power LED binks
to reset it, and then visit
http://tplinkwifi.net
to create a new login password.
Note:
• Please refer to
to learn how to configure Password Recovery.
• You’ll need to reconfigure the router to surf the internet once the router is reset, and please mark down your new
password for future use.
Q3. What should I do if I cannot log in to the router’s web management
page?
This can happen for a variety of reasons. Please try the methods below to log in again.
• Make sure your computer is connected to the router correctly and the corresponding
• Make sure your computer is connected to the router correctly and the corresponding
LED indicator(s) light up.
• Make sure the IP address of your computer is configured as
Obtain an IP address
automatically
and
Obtain DNS server address automatically
.
• Make sure
http://tplinkwifi.net
or
http://192.168.0.1
is correctly entered.
• Check your computer’s settings:
1 ) Go to
Start
>
Control Panel
>
Network and Internet
, and click
View network
status and tasks
.
2 ) Click
Internet Options
on the bottom left.
3 ) Click
Connections
and select
Never dial a connection
.