Cerwin-Vega CVM-1224FXUSB Owner's Manual
16
USB AUDIO INTERFACE (MAC OS X)
1. Connect the audio mixer to your MAC using a
standard USB cable. The LED will light to indicate it is
receiving USB power. The MAC will recognize the USB
audio device and automatically install a universal driver.
2. To select the audio mixer as the computer’s audio
input, open the System Preferences from the dock or
the main Apple Menu.
input, open the System Preferences from the dock or
the main Apple Menu.
3. Next open the Sound preference.
4. Now, click in the Input tab and select USB Audio
CODEC. You may notice that the Volume slider sets
itself to the full level. This will allow you to have full
range using audio mixer hardware input level controls.
CODEC. You may notice that the Volume slider sets
itself to the full level. This will allow you to have full
range using audio mixer hardware input level controls.
5. Next, click in the Output tab and select USB Audio
CODEC. You may notice that the Volume slider sets
itself to the full level. This will allow you to have full
range using audio mixer hardware MAIN Volume
control.
At this point you can begin using your audio mixer with
most any audio recording software, but you need to
select it as an input and output device within the DAW.
When selecting the inputs and outputs just look for and
select the USB Audio CODEC.
CODEC. You may notice that the Volume slider sets
itself to the full level. This will allow you to have full
range using audio mixer hardware MAIN Volume
control.
At this point you can begin using your audio mixer with
most any audio recording software, but you need to
select it as an input and output device within the DAW.
When selecting the inputs and outputs just look for and
select the USB Audio CODEC.