KTI Networks KGS-2422 Leaflet

Page of 2
120607
KGS-2422
Managed 24-Port Modular Gigabit Ethernet
Switches with 100BASE-FX Support
The 24-port Managed Gigabit Ethernet Switches are standard L2 switches that meets all IEEE 
802.3/u/x/z Gigabit, Fast Ethernet specifications. The switches provide three 8-port modular slots. 
Each slot can accommodate one 8-port module. A variety of modules is available for selection. 
They include 10/100/1000M copper module, 100/1000M SFP module, Copper and SFP mixed 
modules, and Fast Ethernet fiber modules. Different modules can be installed flexibly in one device 
rack. The system detects the types of the installed modules and configures the modules 
automatically. With variety of modules and flexibility of installation, the switches can meet most 
requirements of deployment of fiber networks no matter they are Gigabit Ethernet base, Fast 
Ethernet base or even combination of both.
The switches support console CLI, Telnet CLI, Web GUI and SNMP interface for switch 
management. The network administrator can logon the switch to monitor and configure port 
operating mode, Quality of Service, and powerful L2 switching functions such as VLAN, IGMP, 
RSTP etc. In addition, the switches are also featured with security functions such as IEEE802.1x 
and ACL control to make them suitable for office applications.
Key Features:
 Fully modular design with three 8-port module slots supporting Gigabit and Fast Ethernet
 A variety of optional modules is available for selection including Gigabit copper, Gigabit fiber,  
  Gigabit mix of copper and fiber, and Fast Ethernet fiber
 The copper ports support 10/100/1000Mbps auto-negotiation and auto-MDI/MDI-X detection.
 The SFP port can support both 100Mbps fiber transceivers and Gigabit Ethernet SFP fiber   
  transceivers
 Support connectivity for Fast Ethernet fiber, 100BASE-FX with SC/ST/BiDi/VF-45 transceivers
 Flexible installation with any combination of different modules in one rack
 Provides Gigabit full wire speed forwarding
 Supports power saving mode when port link down or different RJ-45 cable length.
 Supports 802.3x flow control for full-duplex and backpressure for half-duplex
 Supports console and in-band Web/Telnet/SSH/HTTPS/SNMP interfaces for switch management
 Supports configurable maximum frame length from 1518 up to 9600 jumbo frame
 Supports port-based ,802.1Q tag-based VLAN and private VLAN
 Provides QoS function
 Supports port bandwidth control for ingress and egress
 Supports packets storm control function for broadcast, unicast and multicast
 Supports MAC address learning, ageing and filtering control
 Supports LACP port link aggregation
 Supports IEEE 802.1d, 802.1w, 802.1s STP (Spanning Tree Protocol), RSTP, MSTP
 Provides port mirroring function
 Provides IP Multicasting with IGMP Snooping function
 Supports DHCP client for dynamic IP configuration
 Supports 802.1X port-based radius authentication for access security
 Provides ACL filtering function
 Provides port data rate control function
 Supports SNTP Client
 Supports LLDP
 Provides SNMP v1/v2C/v3 agent and event trap function
 Supports Configuration download and upload
 19” rack mountable
 Both AC powered model and DC powered model are available for choice
Product Highlights:
 
24-Port Managed Gigabit switch
 
Three 8-Port Module slots
 
10/100/1000M copper connectivity
 
1000M fiber connectivity
 
100M fiber connectivity
 
100/1000M support on SFP port
 
Web/CLI/SNMP/SSH/HTTPS support
 
802.1Q Tagged VLAN
 
Comprehensive QoS
 
 RSTP support
 
802.1X Access control
 
ACL configuration
 
 IGMP snooping
 
 Enhanced security features
DC Power Option
AC Power Option