Traveler DC-7900 User Guide

The flash is designed to function automatically when lighting conditions warrant the
use of flash. You can take an image using a desired flash mode to suit your
circumstances.
1. Rotate 

the 

mode 

dial 

to , , , ,

, or 

.

2. Press the power switch to turn on the

power.

3. Press the four-way controller (W/

).  The

flash mode changes each time the button
is pressed. You can also change the
setting using the four-way controller
(ST).

4. Press the 

 button to confirm the setting.

5. Compose your scene and press the shutter release button.

The camera has four flash modes: Auto, Pre-Flash, Auto + Red-eye, Flash on and
Flash off.
The table below will help you to choose the appropriate flash mode:

 Auto

The flash fires automatically according to the photographic 
conditions.

 Pre-Flash

The “Pre-Flash” mode allows you to brighten the subject prior to 
taking the picture and firing the flash.

 Red-eye

Use this mode to reduce the red-eye phenomenon when you want 
to take natural-looking photographs of people and animals in 
low-light conditions.

 Flash on

The flash will always fire regardless of the surrounding brightness.

 Flash off

The flash will not discharge, regardless of the brightness. Use this 
mode when taking pictures using indoor lighting, for stages and 
indoor competitions, and when the subject is too far away for the 
flash to be effective.

Flash Mod

lash Mode

Aut

uto

OK :

OK :

Flash Mode

Auto

OK :