Sony E 10-18 mm f/ 4 OSS Lens Manual

4-34

SAL55200 (DT 4-5.6/55-200) (DT 55-200mm F4-5.6)

1)

Loosen the screw fixing the focus brush.

2)

Check the conduction between pattern of main PCB assy as shown in figure.

• When the focus brush comes to infinity position, no conduction occurs. (Adjusted)

• When the focus brush do not come to infinity position, the conduction occurs. (Not adjusted)

3)

If not adjusted in step 2), adjust the brush position, perform step 2) again.

4)

After adjustment, apply the adhesive bond (B-10) to the tip of screw fixing the focus brush.

Check the conduction

Apply the adhesive bond (B-10)

Focus Brush