Sony E 10-18 mm f/ 4 OSS Lens User Guide

SAL75300 (4.5-5.6/75-300) (75-300mm F4.5-5.6)

Adhesive bond (B-10): J-6082-612-A

1.

Insert the connecting plate to the groove (longest groove) of the cam tube set.

2.

Fill in the gap in the direction of the arrow, and fix the connecting plate with the two screws.

3.

Apply the adhesive bond (B-10) to the two screws fixed the connecting plate.

Grease (G-85): J-6082-626-A

Apply the grease (G-85) to the shaft of the gear set.

Grease (G-15): J-6082-619-A

1.

Apply the grease (G-15) to the instruction part of the helicoid barrel.

2.

Set the helicoid barrel to the Wide-end position as shown in the figure.

3.

Fit the focus barrel to the inner tube block, and install the focus barrel to the inner tube block until it stops at the inner tube block.

Do not set the front barrel to the Tele-end position.

It comes off from the focus barrel.

Apply the adhesive bond (B-10)

Apply the grease (G-85) (Shaft)

2 6 8 4
1 6 0 4

Apply the grease (G-15)
(All shaded areas)

Fixed Mount

Set to Wide-end

Helicoid Barrel

2 6 8 4

2 6 8 4
1 6 0 4

1 6 0 4

Install until it stops.

Inner Tube Block

Area for attaching
gear set

Area for attaching brush

Focus Barrel

Focus Barrel Block

50 mm

Front Barrel

Hold at approx. 50 mm position
from focus barrel.