Nxp Semiconductors FRDMKW41Z User Manual
FRDM-
KW ) Use ’s Guide
Page 4 of 11
2 Safety information
2.1 FCC guidelines
This equipment is to be used by developers for evaluation purposes only, and must not be
incorporated into any other device or system. This device must not be sold to the general public.
Integrators are responsible for re-evaluating the end product (including the transmitter) and obtaining
a separate FCC authorization. The FCC approval of this device only covers the original configuration of
this device (as supplied). Any modifications to this product (including changes shown in this guide) may
violate the rules of the Federal Communications Commission and Industry Canada and make the
operation of the product unlawful.
incorporated into any other device or system. This device must not be sold to the general public.
Integrators are responsible for re-evaluating the end product (including the transmitter) and obtaining
a separate FCC authorization. The FCC approval of this device only covers the original configuration of
this device (as supplied). Any modifications to this product (including changes shown in this guide) may
violate the rules of the Federal Communications Commission and Industry Canada and make the
operation of the product unlawful.
2.1.1 Labeling
The FCC labels are located on the back of the board.
2.1.2 Operation conditions
The device must comply with part 15 of the FCC rules. Operation is subject to these two conditions:
• This de i e ust ot ause ha ful i te fe e e.
• This de i e ust a ept any interference received, including interference that can cause
undesired operation.
undesired operation.
2.1.3 Exposure limits
The device must comply with FCC radiation exposure limits set forth for an uncontrolled environment.
Install the antenna(s) used by the device to provide a separation distance of at least 8 inches (20 cm)
from all persons.
Install the antenna(s) used by the device to provide a separation distance of at least 8 inches (20 cm)
from all persons.
The modular transmitter must be equipped with either a permanently affixed label or must be
capable of electronically displaying its FCC identification number:
(A) If using a permanently affixed label, the modular transmitter must be labeled with its own FCC
identification number, and, if the FCC identification number is not visible when the module is installed
inside another device, then the outside of the device into which the module is installed must also
display a label referring to the enclosed module. This exterior label can use wording such as the
following: “Contains Transmitter Module FCC ID:XXMFRDMKW41Z.” Any similar wording that
expresses the same meaning may be used. The Grantee may either provide such a label, an example
of which must be included in the application for equipment authorization, or, must provide adequate
instructions along with the module which explain this requirement. In the latter case, a copy of these
instructions must be included in the application for equipment authorization.
capable of electronically displaying its FCC identification number:
(A) If using a permanently affixed label, the modular transmitter must be labeled with its own FCC
identification number, and, if the FCC identification number is not visible when the module is installed
inside another device, then the outside of the device into which the module is installed must also
display a label referring to the enclosed module. This exterior label can use wording such as the
following: “Contains Transmitter Module FCC ID:XXMFRDMKW41Z.” Any similar wording that
expresses the same meaning may be used. The Grantee may either provide such a label, an example
of which must be included in the application for equipment authorization, or, must provide adequate
instructions along with the module which explain this requirement. In the latter case, a copy of these
instructions must be included in the application for equipment authorization.
Changes or modifications not expressly approved by the party responsible for compliance could void the
user's authority to operate the equipment.
user's authority to operate the equipment.