Trendnet TEW-601PC User Manual
Getting Started with the
TEW-601PC
-- 9
WPA/WPA2
WPA encrypts all traffic between the access point and the client using either TKIP or AES
encryption. Depending on the authentication protocol selected, each client must authenticate
using their own unique username, password, and security certificate.
WPA encrypts all traffic between the access point and the client using either TKIP or AES
encryption. Depending on the authentication protocol selected, each client must authenticate
using their own unique username, password, and security certificate.
WPA-PSK/WPA2-PSK
WPA-PSK or WPA2-PSK is a compromise between WPA/WPA2 and WEP. Like WEP, it uses a
pre-shared key that every user of the network must have in order to send and receive data. Like
WPA, it uses either TKIP or AES.
WPA-PSK or WPA2-PSK is a compromise between WPA/WPA2 and WEP. Like WEP, it uses a
pre-shared key that every user of the network must have in order to send and receive data. Like
WPA, it uses either TKIP or AES.
5. Make the changes you want and click TCP/IP Config.
Select the Use IP Changer checkbox. This allows you to bypass your existing wireless TCP/ IP
settings and configure TCP/IP settings for each profile.
Use DHCP
DHCP (Dynamic Host Configuration Protocol) automatically assign IP addresses. Check this
radio button if your router is set to DHCP.
Use static IP below
Check this radio button if you have to enter a static IP address.
settings and configure TCP/IP settings for each profile.
Use DHCP
DHCP (Dynamic Host Configuration Protocol) automatically assign IP addresses. Check this
radio button if your router is set to DHCP.
Use static IP below
Check this radio button if you have to enter a static IP address.
I
T
IS RECOMMEDED THAT YOU USE
WPA/WPA2
OR
WPA-PSK/WPA2-PSK
WHENEVER POSSIBLE.
WPA (W
I
-F
I
P
ROTECTED
A
CCESS) PROVIDES STRON
-
GER ENCRYPTION THAN THE EARLIER
WEP (W
IRED
E
QUIVALENT
P
RIVACY)
METHOD.
WPA2
PROVIDES EVEN STRONGER ENCRYPTION, AUTHENTICATION
AND KEY MANAGEMENT.
IMPORTANT