Contec DS110-APL User Manual
Settings
FX-DS110-APL
31
SNMP
Community Name
This is an SNMP recognizable character string, which functions
like a password for access to the access point from an SNMP.
Programs can access the access point MIB by using this community
name.
like a password for access to the access point from an SNMP.
Programs can access the access point MIB by using this community
name.
Factory setting: [public]
Input values:
Up to 31 alphabetic characters, case sensitive.
Access
This setting determines the access authority for the community.
The selection is between 'Read Only' access or 'Read & Write'
access.
The selection is between 'Read Only' access or 'Read & Write'
access.
Factory setting: [Read & Write]
Send Trap
This setting determines whether the SNMP agent system will notify
the user of errors such as access right errors, or APL startup.
the user of errors such as access right errors, or APL startup.
Factory setting: Unchecked (Do not send trap).
・ IP Address:
Enter the IP address of the user to which the trap
is to be sent.
is to be sent.
Name
This setting determines the name of this access point on the SNMP.
Factory setting: No setting entered
Input values:
Maximum 31 characters
Location
This setting records the physical location of the access point, such
as "8F R&D Department."
as "8F R&D Department."
Factory setting: No setting entered
Input values:
Maximum 31 characters