Contec DS110-APL User Manual
SNMP
Agent
Functions
FX-DS110-APL
49
Building-in to SNMPc
Follow these steps to install SNMPc Ver. 4.
(1) Start the SNMPc Setup.program.
To start SNMPc Ver. 4, select [Start] – [SNMPc 4.0] – [Setup].
After startup, verify the user registration information.
After startup, verify the user registration information.
(2) Insert the Maintenance Tools floppy disk provided with this
product into the floppy disk drive. Enter the floppy disk
drive path name followed by SNMPc.4\, and click 'OK.'
drive path name followed by SNMPc.4\, and click 'OK.'
Example: If the floppy disk drive is the A: drive, enter
A:\SNMPc.4\.
A:\SNMPc.4\.
(3) Select [CONTEC FX-DS110-APL], and click [OK] to start
installation.
(4) When the following message appears, click [No] to exit the
program.
[Do you want to install additional vendors?]
MIB Database Updates
After installing a new vendor, you will have to update the MIB
database the next time SNMPc is started.
database the next time SNMPc is started.
Follow these steps to update the MIB database. In this description
we use 'SNMPc Ver.4' as an example.
we use 'SNMPc Ver.4' as an example.
(1) Start
SNMPc.
To start SNMPc Ver. 4, select [Start] – [SNMPc 4.0] –
[SNMPc].
[SNMPc].
(2) Click [Yes] to update the MIB database.
(3) When you are finished updating the MIB database, click [OK].
The build-in to SNMPc is not complete.