Contec DS540-APDLAP User Manual
4. Setup Preparation
38
FX-DS540-APDL-U
Setup Using a Web Browser
You can setup the AP software from a PC running a web browser via the LAN or a modem. As this
provides a graphical interface, setup using a web browser is much easier than using a TELNET.
The factory default IP address for the AP is listed on the underside of the case. You can use this address
to connect to the AP from a web browser but this requires that you change the IP address of the PC to be
in the same network group as the AP’s IP address (when finished, set the IP address back to its original
value).
Supported web browsers (recommended)
-
Microsoft Internet Explorer 5.01 or higher
-
Netscape Navigator 6 or higher