APC ACF002 User Manual

Page of 28
2
NetworkAir RM Air Distribution Unit
Safety Information
Warning
Disconnect power to the enclosure before installing the 
Air Distribution Unit. Failure to do so may result in 
personal injury or damage to equipment.
Check to see that a fan guard is securely in place over 
each of the air inlet openings.
Do not apply power to the unit until the installation is 
complete. The Air Distribution Unit contains moving 
parts, which are potentially hazardous when operated 
outside of the enclosure.
Keep fingers and clothing away from the fans. When 
powered on, they have moving parts which can cause 
personal injury.
Do not attempt to move a heavily loaded enclosure by 
yourself. Doing so introduces risk of injury due to muscle 
strain or the tipping of the enclosure. Fully loaded 
enclosures require at least two persons to move safely.
Keep the included alcohol swab away from sparks or 
open flames.
Check that the power cord plugs and sockets are in good 
condition before installation.
Connect the Air Distribution Unit to an IEC C-13 outlet. 
The outlet must be connected to appropriate branch 
circuit/mains protection (fuse or circuit breaker). 
Connection to any other type of outlet may result in a 
shock hazard.
This equipment contains potentially hazardous voltages. 
Do not attempt to disassemble the unit.
Always install and operate the Air Distribution Unit as 
shown in this manual.