iRiver H10 User Manual

45

44

Press and hold the       button to open
the functions menu.

Recording

Recording

Use the         buttons to select the Record icon
then press the      button to open the record
standby screen.

Press the 

button in the record standby screen to open the Record Setting

screen.

Press and hold the       

buttons in the Record

Setting screen to select the Source item. Setting
the Source option will change Bit rate, Input
Volume, and Output Volume accordingly.

The option (Bitrate/Input Volume/Output Volume) value for each source for the

recording is saved. It is also possible to change the preset options for each 
Source option for recording.

Source Types

LINE IN: Analog signal from an external device

INT. MIC: Voice using the internal microphone
EXT. MIC: Voice using an external microphone

TUNER: Record FM radio

Bitrate

Quality of the recording. (40~320Kbps, 

).

Input Volume(0~20)
Volume of the recording. High Input Volume increases the volume of the 
recording file. But can also cause distortion in the recording.
Output Volume(0~40)

The product supports monitoring of the recording sound. This option changes 
the monitoring volume and does not affect the recording file.

[Note]

Use the           

buttons to select an option and use the       buttons to

change the Bit rate, Input Volume, or Output Volume. Press the        button
to return to the Recording Standby display from the Record Setting display.

Volume control is not available while recording
For best results, experiment with various volume settings and microphone distances 
in each setting you record in.

[Note]

Press the        button to start the MP3 recording.

20