Dell Wyse 920324-01L User Manual

The bracket enables a Wyse P20 zero client to be mounted to a wall or on most VESA 
compliant mounting surfaces and monitors. Both VESA 75 mm and 100 mm mounting 
patterns are supported. The mounting bracket consists of two (2) pieces. The largest 
bracket piece attaches to the mounting surface using the VESA mounting patterns. 
User-provided hardware must be used that can withstand a force of 25 pounds (11.35 
kilograms). The zero client is inserted in a vertical position and cables are attached. The 
smaller bracket piece attaches to the VESA compliant mounting monitor. The monitor 
bracket and mounted wall bracket pieces are then joined with the provided four (4) thumb 
screws. 

When determining location, take into account the cable lengths of the 
monitor, keyboard, mouse, power supply, and peripherals.

Mount the zero client only as indicated; improper orientation (where the back 
panel or front panel is facing down) could inhibit the dissipation of heat from 
the device and damage it.

Do not enclosed the zero client in a confined environment without proper 
ventilation. If you have questions, contact the Wyse Sustaining Engineering 
Group.