Autostart AS2402 User Manual

User Guide 

P. 5 

Note: The programming of these features should be left to a professional. Changing any 

one of the settings may adversely affect the operation the Module. 

Note: Can only be activated if button 

Ι is programmed as 

 or 

 button. 

If installed, the Starter Kill can be programmed to arm in Active Mode (will not arm 

automatically) or in Passive Mode (will arm automatically). 
•  To disarm the Starter Kill in Active or Passive Mode, press button Ι on the transmitter. The 

parking lights will flash twice. (If Remote Door Locks were installed, this will also unlock 

the doors.)  In Passive Mode, the system will automatically rearm 1 or 3 minutes after the 

doors were unlocked. 

•  To  arm  the Starter Kill in Active or Passive Mode, press and hold button Ι on the 

transmitter. The parking lights will flash once. (If Remote Door Locks were installed, this 

will also lock the doors). In Passive Mode, the system will automatically arm 1 or 3 minutes 

after the engine is shut down. 

Remote Door Locks 

Note: Can only be activated if button 

Ι is programmed as 

 or 

 button. 

If your system was installed with the Remote Door Locks option, you will have the 

convenience of remote keyless entry. 
To 

1.  Press and hold button 

Ι for approx. 1 sec. 

2.  The parking lights will flash once and the L.E.D. will flash slowly to confirm that the 

doors have been locked and that the Starter Kill feature is enabled if it was 

installed. 

1.  Press and hold button 

Ι for approx. 1 sec. 

2.  The parking lights will flash twice and the L.E.D. will go out to confirm that the 

doors have been unlocked and that the Starter Kill feature is disarmed if it was 

installed. 

Note: If installed and configured in Passive Mode at installation, the Starter Kill feature will 

rearm automatically 60 seconds after the doors are unlocked. For that reason, you may 

have to unlock your doors a second time if some time elapses before you actually start 

the engine. 

This is an added security feature. If your system was installed with the Ignition-controlled 

Door Locks option, the doors will automatically be locked as soon as the user presses the 

brakes while the ignition key is in the 

 position. 

When the key is turned to the Ignition 

 position, the doors will automatically be unlocked. 

(Only available if remote Door Lock Option is installed) 
Secure Lock Option 

Before it can remote-start your vehicle, the module must first disarm the factory security 

system. 

The Secure Lock feature may be required on certain vehicle models with factory security 

systems that automatically unlock the doors when the security system is disarmed. 

To keep your vehicle protected when the factory security system is disarmed for a remote 

start, Secure Lock will relock your doors as soon as the vehicle has started. 

Once the engine run cycle ends, Secure Lock will rearm your factory security system.