Fujitsu TX120 S2 VFY:T1202SF020DE S26361-F2567-L310 Data Sheet

Product codes
VFY:T1202SF020DE S26361-F2567-L310
Page of 7
Data Sheet
 Fujitsu PRIMERGY TX120 S2 Server 
Page 3 / 7
http://ts.fujitsu.com/Primergy
Technical details
Mainboard
Mainboard type
D2785
Chipset
Intel® 5100
Processor quantity and type
1 x Intel® Core™2 Duo series
Processor
Intel® Core™2 Duo processor P8400
 (2C, 2.26 GHz, SLC: 3 MB, TLC: -, Turbo: No, 1066 MHz, 25 W)
Intel® Core™2 Duo processor T9400
 (2C, 2.53 GHz, SLC: 6 MB, TLC: -, Turbo: No, 1066 MHz, 35 W)
Memory slots
4 (2 bank with 2 slots each)
Memory slot type
DIMM (DDR2)
Memory capacity (min. - max.)
1 GB - 16 GB
Memory protection
ECC
Memory notes
Mix and match possible; with dual channel operation better performance (2 modules with equal capacity necessary). 
Single channel (1 module) configuration possible.
Memory modules
1 GB (1 module(s) 1 GB) DDR2, registered, ECC, 667 MHz, PC2-5300
2 GB (1 module(s) 2 GB) DDR2, registered, ECC, 667 MHz, PC2-5300
4 GB (1 module(s) 4 GB) DDR2, registered, ECC, 667 MHz, PC2-5300
Interfaces
USB ports
8 x USB 2.0 (2x front, 5x rear, 1x internal)
Graphics (15-pin)
1 x VGA
Serial 1 (9-pin)
1 x RS-232-C
LAN / Ethernet (RJ-45)
Service LAN (RJ45)
1 x dedicated Service LAN port for iRMC S3  (10/100/1000 Mbit/s)
Optional front service LAN port (10/100 Mbit/s)
Onboard or integrated Controller
RAID Controller
4 port SATA with RAID 0/1 for HDDs
SATA Controller
Intel® ICH9R
SATA Controller type notes
4 port for internal SATA HDDs with RAID 0, 1, 10 for Windows and Linux
LAN Controller
Intel® 82567-LM4 onboard, 10/100/1000 Mbit/s Ethernet, PXE-Boot via LAN from PXE server
Remote Management Controller
Integrated Remote Management Controller (iRMC S2, 32 MB attached memory incl. graphics controller), IPMI 2.0 
compatible
Trusted Platform Module (TPM)
optional TPM
Slots
PCI-Express x8
3 x Low profile (1 slot can be used for modular RAID only)
PCI slots
1 x Low profile (PCI 32-bit / 33 MHz, 5 V)
Slot Notes
in SAS configuration 1x PCI-Express occupied by modular RAID controller; VMWare requires SAS RAID Controller
Drive bays
Hard disk bays
4 x 2.5-inch hot-plug SAS/SATA
Accessible drive bays
1 x 3.5/1.6-inch for backup devices or HDD option
1 x 5.25/0.5-inch for CD-RW/DVD
Optional hard disk bays
2 x 2.5-inch hot-plug SAS/SATA (occupies 3.5/1.6-inch bay)
Operating panel
Operating buttons
On/off switch
Status LEDs
Power (amber / green)