Manualsbrain.com
  1. Manuals
  2. Brands
  3. Buffalo
  4. 09101896-0
  5. User Manual

Buffalo 09101896-0 User Manual

Download
Page of 184
LAN
USB
USB
EJECT
ON
OFF
AUTO
ROUTER
1
2
3
4
POWER
INTERNET
16
11
18
14
15
17
12
10
13
Chapter 1  Product Overview
WZR-HP-G300NH / WZR-HP-G300NH2 User Manual
11
Back Panel
10
Router Switch
Switches router mode between enabled, disabled, and auto.
On: 
Router functionality is enabled (router mode).
Off:
Router functionality is disabled (bridge/AP 
mode).
Auto:
This switches between modes automatically 
based on whether or not another router is 
detected on the Internet port. The default setting 
for this switch is Auto. 
11
USB Eject Button
To dismount a USB hard drive, hold down this button until 
the USB LED flashes (about 3 seconds).  The USB drive can 
then be unplugged safely.
12
USB LED (Blue)
On: 
The USB disk is connected.
Off:
The USB drive can be removed or no USB drive is 
connected.
Flashing: Overcurrent detected.
Note:  When this LED is blinking, the connected USB drive 
cannot be used. Remove the connected USB drive. If 
the LED continues to blink even after the USB drive is 
removed, restart the AirStation.
 
Do not remove the USB drive or turn off the 
AirStation while the USB LED is on.
13
USB Port
Connect the USB drive.
Note:  USB hubs are not supported. 
14
LAN Port
Connect your computer, hub, or other Ethernet devices to these ports. 
This switching hub supports 10 Mbps,100 Mbps, and 1000 Mbps 
connections.
15
LAN LED (Green)
On: 
An Ethernet device is connected.
Flashing:
An Ethernet device is communicating.