Buffalo 09101912-0 User Manual

 
Wireless -> Wireless Security 
  Choose and configure your desired security mode.  Please note that 

WEP is insecure and should only be used if no other option is 
available. 

  Click “Apply Settings“ 
 

You can now connect the router to the Internet and your local network. 
If you’re running a DHCP server in your LAN, connected wireless 
devices will get their IP addresses from the server. 

 

The router can be also used as a wireless LAN client. This can be 
useful if you want to connect devices to your wireless LAN that do not 
have a wireless LAN interface. In this configuration, the wireless LAN 
interface acts as a wireless client.  Attached wired Ethernet devices 
can also access the WAN through the wireless connection. 

 

  
Setup -> Basic Setup 
  WAN Setup 

o

  Set “Connection Type“ to “DHCP” to have the AirStation get its IP 

address from a DHCP server, or to a “Static IP“ if no DHCP server 
is available. 

  Network Setup 

o

  Enter the desired LAN-side IP address for the router in “Router 

IP“.  

o

  Set the “DHCP Type“ to “DHCP Server“ (this is the default setting). 

o

  “Enable” “DHCP Server“ (this is the default setting). 

o

  Adjust the DHCP address range to match your requirements. 

 

- 20 -