Buffalo 09102002-0 External Photos
REPORT NO: 06J10094-10
DATE: March 2, 2006
FCC ID: FDI-09102002-0
COMPLIANCE CERTIFICATION SERVICES
Page: 24 of 39
This report shall not be reproduced except in full, without the written approval of CCS.
9
SAR MEASURMENT RESULTS (5GHZ)
Maximum output power of the EUT at this band is below 25mW; therefore, SAR test is done on one host
lap with the minimum separation distance from body. See FCC Laboratory Division, March 18, 2004,
“Mobile and Portable Device RF Exposure Equipment Authorization Procedures.”
9.1
lap with the minimum separation distance from body. See FCC Laboratory Division, March 18, 2004,
“Mobile and Portable Device RF Exposure Equipment Authorization Procedures.”
9.1
POSITION 1 (TOSHIBA SATELLITE)
Measured SAR
Power Drift
Extrapolated
1)
SAR
1g (mW/g)
(dBm)
1g (mW/g)
36
5180
52
5260
0.019
0.000
0.019
64
5320
Measured SAR
Power Drift
Extrapolated
1)
SAR
1g (mW/g)
(dBm)
1g (mW/g)
42
5210
50
5250
0.024
0.000
0.024
58
5290
Channel
f (MHz)
802.11a 5.2 GHz (6Mbps)
Channel
f (MHz)
802.11a 5.2 GHz Turbo Mode
Notes:
5) The exact method of extrapolation is Measured SAR x 10^(-drift/10). The SAR reported at the end of the measurement
process by the DASY4 system can be scaled up by the Power drift to determine the SAR at the beginning of the
measurement process.
measurement process.
6) The SAR measured at the middle channel for this configuration is at least 3 dB lower (0.8 mW/g) than SAR limit (1.6
mW/g), thus testing at low & high channel is optional.
7)
Please see attachments for the detailed measurement data and plots showing the maximum SAR location of the EUT.