Buffalo 000000004 User Manual
27
LAN Port
Configure the wired LAN port here.
LAN Settings - LAN Port
Wired LAN Port
Displays the port number of the wired LAN port.
Enable
Select whether to enable or disable the wired LAN port.
Speed & Duplex
Select the communication speed of the wired Ethernet connection.
Normally, use “Auto”. If the connected device cannot be automatically
Normally, use “Auto”. If the connected device cannot be automatically
recognized, try to use another one.
MDI
Select the communication status (straight-through or crossover
connection) of the AirStation with the connected device.
“Auto” is recommended for most users.
“Auto” is recommended for most users.
Flow Control
Select whether to enable or disable flow control. If flow control is
enabled, overflows of the receive-side buffer are detected and a specific
frame is sent to enable send-side restriction.
802.3az
Select whether to enable or disable IEEE802.3az EEE. When enabled, the
power supplied to the LAN port can be limited when data is not flowing.
Note: The connected device must support IEEE802.3az EEE for this to
work properly.
Note: The connected device must support IEEE802.3az EEE for this to
work properly.