Buffalo 000000004 User Manual
7
Hardware Overview
Front Panel LEDs
1
Power LED
On:
Power is on.
Off:
Power is off.
On:
Power is on.
Off:
Power is off.
Note: You can permanently turn off the power LED in Settings.
2
Diag LED (Red)
This indicates the status of the unit depending on the number of blinks per cycle.
This indicates the status of the unit depending on the number of blinks per cycle.
Note: When the unit is first turned on or restarted, the diag LED will blink for almost a minute during boot. This is
normal.
normal.
Off:
Normal.
Glows red at startup (about 2 to 3 minutes):
RAM error.
Blinks red twice at startup or immediately after settings are saved:
Flash ROM error.
3 blinks **:
Wired Ethernet LAN error.
4 blinks **:
Normal.
Glows red at startup (about 2 to 3 minutes):
RAM error.
Blinks red twice at startup or immediately after settings are saved:
Flash ROM error.
3 blinks **:
Wired Ethernet LAN error.
4 blinks **: