Omnitron FlexPoint T1/E1 4493-1 Leaflet
Product codes
4493-1
FlexPoint
FlexPoint
TM
FlexPoint
T1/E1
T1/E1 Copper to Fiber Media Converters
The FlexPoint T1/E1 is a modular T1/E1 copper to fiber media
converter that provides reliable and cost-effective extension
of devices such as PBXs, CSUs and routers via fiber.
Designed as a transparent repeater, the FlexPoint T1/E1
Designed as a transparent repeater, the FlexPoint T1/E1
supports standard T1, E1 and Primary Rate Interface (PRI),
voice or data. The converter also supports AMI, B8ZS and
HDB3 line codes. Manual switch settings with on-the-label
descriptions enable easy configuration of T1/E1 line codes
and line lengths.
A crossover switch makes it simple to connect the FlexPoint
A crossover switch makes it simple to connect the FlexPoint
T1/E1 converter to PBXs or CSUs and eliminates the need
for crossover and custom cables to connect devices.
The fiber port operates at 1310nm and supports SC or ST
The fiber port operates at 1310nm and supports SC or ST
connectors. Multimode fiber models support distances of up
to 5km, and single-mode fiber models support distances of
up to 60km.
Diagnostic features include local loopback, remote loopback
Diagnostic features include local loopback, remote loopback
and all 1’s insertion (AIS) modes for the copper or fiber
segments. Local loopback validates connectivity to local T1/
E1 lines, while remote loopback validates the entire fiber
segment from one unit without having to make adjustments on
both ends. Dry contact relay option allows a separate T1/E1
alarm circuit to be notified when a loss of power is detected.
The FlexPoint T1/E1 features descriptions of the LED
The FlexPoint T1/E1 features descriptions of the LED
indicators on the label for easy in-the-field configuration,
installation and maintenance. The LEDs report the availability
of power, connection status, diagnostic or loopback modes of
operation and the detection of all 1’s by the fiber and UTP ports.
FlexPoint modules can be mounted utilizing optional wall-
FlexPoint modules can be mounted utilizing optional wall-
mounting hardware or with DIN-rail mounting brackets. They
can also be rack-mounted in a 5-Module shelf or in a high-
density 14-Module, power-redundant Powered Chassis.
FlexPoint modules installed in the 5-Module shelf or used
FlexPoint modules installed in the 5-Module shelf or used
as standalone devices can be powered by an external AC to
DC power adapter, or through the 5VDC chassis connector.
Standalone modules can also be powered by attaching an
external DC power supply (18-60VDC). When used in the
14-Module power-redundant Powered Chassis with any
combination of AC and DC power supplies, the installed
modules are powered via the 5VDC chassis connector.
The wide variety of FlexPoint mounting and power options
The wide variety of FlexPoint mounting and power options
provide flexible upgrade paths as network requirements
change and grow.
FlexPoint unmanaged media converters are easy to use
FlexPoint unmanaged media converters are easy to use
and provide dependable fiber connectivity in Enterprise and
Government networks around the world.
The FlexPoint T1/E1 is a modular copper to fiber media
■
converter that supports ANSI, AT&T, ITU and ETSI
standards
Supports AMI, B8ZS and HDB3 line codes
■
Fiber port supports multimode or single-mode fiber SC
■
or ST connectors, and distances up to 60km
Labeled status LEDs and switches for quick and easy
■
installation
Features a crossover switch for easy connections to
■
PBXs or CSUs
Local and remote fiber loopback switches with optional
■
all 1’s insertion (AIS) to facilitate easy installation
Equipped with dry relay contacts for connection to alarm
■
equipment
Wall-mount or rack-mount on a 5-Module shelf or in
■
a 14-Module power-redundant FlexPoint Powered
Chassis
Completely software independent with no installation of
■
drivers required
Peace-of-mind reliability backed by a lifetime warranty
■
and free 24/7 technical support
Key Features